The Edit Schema window

  • job schema , member schema , material schema , bolt schema , hole schema and weld schema are distinct types of schema entries. The types of schema ( member or material or etc.) whose entries are shown on this window depends on how the window was opened .

" User Namespace " is a set of schema entries that has been user-added by pressing the " Add " button.

" SDS2Detailer " is a set of plugin schema entries whose " State " is set to ' Active ' at Home > Project Settings > Job > Activate Custom Properties .

To open this window ( Edit Schema ):

Home > Project Settings > Job > Custom Properties > ...

  • Job Properties opens a version of this window that shows a list of job schema entries.
  • Member Properties opens a version of this window that shows member/group member schema entries .
  • Material Properties opens a version of this window that shows material schema entries.
  • Hole Properties opens a version of this window that shows hole schema entries.
  • Bolt Properties opens a version of this window that shows bolt schema entries.
  • Weld Properteis opens a version of this window that shows weld schema entries.

Alternatively, in Modeling (classic), you can open this window by choosing Settings > Job Settings > Custom Properties > Job or Member or Material or Hole or Bolt or Weld .

Once this window is opened :

Modular or Legacy?

  • Home > Project Settings > Job or Fabricator Options ." Select the " Home > Project Settings > Job " tab. On that tab, look under the [ Custom Properties ] heading. If you see an option named " Activate Custom Properties ," then a modular flavor was selected at the time when your current Job was created.
  • If there is no " Activate Custom Properties " option under that heading, then a legacy flavor was selected when your current Job was created.
  • Another way to tell if you are in a modular-flavor Job is to press the " Properties " button in Modeling . If the Edit Properties window opens , then a modular flavor was selected when your current Job was created. If the Custom Properties window opens , a legacy flavor was selected when your current Job was created.
  • The Edit Schema window shows modular plugin schema entries in plugin sets . It shows non-plugin schema entries in the " User Namespace " set.

Also see :

page 1 | contents | home > project settings > job > custom properties > | classic | top

The " User Namespace " set of schema entries :

VIDEO A new member custom property schema entry whose prompt name is " Painted " is added to the " User Namespace " set of properties. The result in Modeling is a " Painted " custom property entry field that is immediately accessible (via the MEMBER Edit Properties window) by all members in the model. (Recorded in SDS2 Detailing , v2018.)

In this example, the " User Namespace " set of schema entries consists of schema entries that are named " UserComment1 " and " UserComment2 " and " UserComment3 ." Each of these schema entries was created by pressing the " Add " button.

  • A " User Namespace " schema entry set appears on this window regardless of the " Flavor " that was selected at the time when your current Job was created.
  • When you press " Add " to create a new schema entry, that entry is added to the " User Namespace " schema entry set.
  • When you use the utility Merge Schema into Current Job to copy a schema type (' Job ' or ' Member ' or etc.) from another Job, then the schema entries in the " User Namespace " for that schema type in that other Job are copied to the " User Namespace " for that schema type in your current Job.
  • The " Details... " " Delete " " Up " and " Down " buttons can operate on a schema entry that you select in the " User Namespace " set. When no schema entry is selected, these buttons are disabled ( grayed out ).
  • When you select a member schema entry from the " User Namespace " set and press the " Details ... " button, you will find that the options " Add to member detail " and " Use to split piecemarks " and " Add to BOM " are editable. This is not true for a member schema entry from a plugin schema entry set . It is also not true if the schema entry is not a member schema entry.
  • On the Edit Properties window in Modeling , custom property entry fields created by " User Namespace " schema entries are placed under a " User Namespace " leaf.

page 1 | contents | home > project settings > job > custom properties > | classic | top

Sets of plugin schema entries :

In this example, the plugin schema entries are " SDS2Detailer.Architecturally Exposed " and " SDS2Detailer.BackCheckedBy " and " SDS2 Detailer.BackCheckedDate ." The modular schema entry set is named " SDS2Detailer " and is shown here, on this window, because a plugin with the " Name " of " SDS2Detailer " was set to active at Home > Project Settings > Job > Activate Custom Properties .

  • Sets of plugin schema entries are named after custom property plugins. The complete list of such plugins (any of which can potentially be found on this window) can be found at Home > Project Settings > Job > Activate Custom Properties . On that Activate Custom Properties window, you will find that the " Name " of each plugin whose " State " is set to ' Active ' may potentially match up with the name of a set of plugin schema entries on this window. The two names will exactly match if the type of schema entries that you are editing (member or job or etc.) is the same as the " Type " of plugin that is " Active '.
  • You cannot " Add " a new schema entry to a set of plugin schema entries. When you press the " Add " button to create a new schema entry, that entry is added to the " User Namespace " schema entry set.
  • When you use the utility Merge Schema into Current Job to copy a schema type (' Job ' or ' Member ' or etc.) from another Job, then each "plugin set" that is shown on this window in that other Job is copied to your current Job and in shown on this window in your current Job.
  • You cannot " Delete " a schema entry from a set of plugin schema entries. The " Delete " button can be used to remove a schema entry from the " User Namespace " schema entry set.
  • You can edit a plugin schema entry by pressing the " Details ... " button. However, the member schema options " Add to member detail " and " Use to split piecemarks " and " Add to BOM " are disabled ( grayed out ) for a plugin schema entry. Also, you cannot change the " Prompt " for a pugin schema entry.
  • To add a set of plugin schema entries so that it is shown on this window, you need to change the appropriate plugin's " State " from ' Available ' to ' Active ' at Home > Project Settings > Job > Activate Custom Properties .
  • To remove a set of plugin schema entries so that it is no longer shown on this window, you need to change the appropriate plugin's " State " from ' Active ' to ' Available ' at Home > Project Settings > Job > Activate Custom Properties .
  • at Home > Project Settings > Job > Activate Custom Properties , the " Type " of plugins that are SDS2 provides (v2018) are ' Job ' and ' Material ' and ' Member '. This means that you can get plugin schema entries for holes, bolts or welds on this window only if such a plugin has been created by a source other than SDS2. For example, you might have created your own custom property plugins for hole, bolt, or weld custom properties.

page 1 | contents | home > project settings > job > custom properties > | classic | top

The " Details... " " Add " " Delete " " Up " " Down " buttons :

lets you edit/review a schema entry.

1 . Open the Edit Schema window (this window). Note that if you choose " Job " when opening this window you will, beginning in step 2, be editing/reviewing an entry to the job schema. When you choose " Member ," you will be editing/reviewing a member schema entry.

2 . Select a schema entry, then press the " Details " button.

3 . The Add/Edit Schema Entry window opens. Either make changes to that window, then press " OK ." Or review the information on that window, then press " Cancel ."

4 . A change made in step 3 may, for example, affect the prompt that is shown for the affected custom property field on the Edit Properties window. Where xxx = member or material or hole or bolt or weld , if the schema entry you changed is part of the xxx schema, then all xxx entities in your current 3D model will be affected.

Warning : As described here , an editing change may also cause members to be marked for processing or detailing.

lets you add a new schema entry.

VIDEO Pressing the " Add " button creates a new schema entry in the " User Namespace ," resulting in a custom property entry field that immediately becoming accessible on the MEMBER Edit Properties window. The property is available to all members in the model. (Recorded in SDS2 Detailing , v2018.)

1 . Open the Edit Schema window (this window). Note that if you choose " Job " when opening this window you will, beginning in step 2, be adding an entry to the job schema. If you choose " Member ," you will, in step 2, be adding a member schema entry.

2 . Press the " Add " button.

3 . The New Schema Entry window opens. Enter a " Name " and " Type ," then press the " Next " button.

4 . The Add/Edit Schema Entry window opens. The options that are shown on the Add/Edit Schema Entry window depend on the type of schema entry you are adding. For example, if you are adding a member schema entry, many options are visible on the Add/Edit Schema Entry window that are not visible when you add a job schema entry. Make the appropriate entries, then press " OK ."

5 . The Edit Schema window (this window) again becomes active. Confirm that the schema entry you have just added is listed on it. If the " Flavor " selected for your current Project at the time it was created was a modular flavor , the schema entry you just added (steps 2, 3, 4) is placed into the " User Namespace " set of schema entries.

6 . In Modeling or at Home , you can verify that a new field has been entered on the Edit Properties window that opens for job custom properties or member custom properties or group member properties . For material properties or bolt properties or hole properties or weld properties , you will have to verify this in Modeling . Where xxx = member or material or hole or bolt or weld , if the schema entry you added is part of the xxx schema, then all xxx entities in your current 3D model will be affected.

Warning 1 : As described here , adding a new schema entry may also cause members to be marked for the piecemarking phase of Create Solids or to be marked for detailing.

Warning 2 : If a legacy flavor was selected as the " Flavor " when your current Job was created, adding new schema entries may not update the appearance of the Custom Properties window if that window gets its entry widgets from a Python script. See this special case ,

1 . Select any schema entry that is in the " User Namespace " schema entry set, then press the " Delete " button.

2 . The selected schema entry is removed from the " User Namespace " schema entry set. Custom property fields associated with the schema entry you deleted are deleted from the Edit Properties window for all items in that class of schema. If, for example, the deleted schema entry was part of the member schema, the field associated with that entry will be removed for all beams, columns, braces, etc. that are in your current 3D model.

Tip: If members exist in your current Job and you delete a member schema entry for which " Use to split piecemarks " is checked, all members in the entire 3D model can optionally be marked for the piecemarking phase of Create Solids . If you delete a member schema entry for which " Add to member detail " is checked, all members can optionally be marked for detailing . Why "optionally"? Because when you press " OK ," you are given a yes-no dialog that gives you the option of preventing this marking from taking place.

Also see: Custom Properties in the Delete Project Items utility can be used to delete the member schema or material schema or etc. This will remove all custom property fields from the Edit Properties window for all members or material or etc.

moves the selected entry up on the list of schema entries. If a modular flavor was selected as the " Flavor " when your current Job was created, the " Up " button only works on schema entries that are in the " User Namespace " set of schema entries. Moving a schema entry up on this window moves the corresponding custom property entry field up on its edit window in Modeling .

works the same as the " Up " button, except that this button moves the schema entry down.

page 1 | contents | home > project settings > job > custom properties > | classic | top

A special case ( legacy properties only ): Edit Schema changes the schema file, but not the Custom Properties window.

Legacy properties: If, when creating your current Job , you selected a legacy flavor , the Custom Properties window for members will have a horizontal or vertical tab set that is similar to the horizontal tab set that is shown here:

Scenario: You choose Job or Fabricator Options > Member to add new schema entries. This changes the meta/schema/member file in your current Job. When you look at that file, you see that it has changed. However, the Custom Properties window still looks exactly like it did before you added the new schema entries. The reason for this is that, when ' DDLegacy ' or ' CollaborativeProperties ' or ' ElectronicApproval ' is selected as the " Flavor ," a Python file named Member.py is installed in the custom folder of your current Job. This Member.py file creates a custom property Python dialog that calls variables from the meta/schema/member schema file and overlays the Custom Properties window, allowing you to edit the custom property fields for individual members. The schema entries that you set up on this window are applied as custom properties to all members in your current 3D model -- you just can't see them or edit them on the Custom Properties window for members because the Python dialog is in the way. To make the new schema entries appear as editable custom properties on the member Custom Properties window, you need to change the Python file custom/Member.py in your current Job. Watch this YouTube video beginning at 7:33 -- Adding Custom Properties to Details ( ) -- for an example of how to edit the Member.py file.

Recommendation: When you create a new project, try selecting ' Modular ' or ' Default ' or some other modular flavor as the custom property " Flavor ." Modular custom properties do not require that you mess with Python scripts in order to add them to the user interface.

page 1 | contents | home > project settings > job > custom properties > | classic | top

The " OK " and " Cancel " buttons :

closes this window. Please note the following:

If you confirm these schema changes, all members will be marked for piecemarking.
Continue?

     
A yes-no dialog like this one relates to a change to the " Use to split piecemarks " option.

If you confirm these schema changes, all members will be marked for detailing.
Continue?

     
A yes-no dialog like this one relates to a change to the " Add to member detail " option.

Assuming that members exist in your current Job: If you pressed " Details ... " and changed a " Use to split piecemarks " schema entry from checked ( ) to unchecked ( ) or vice-versa or if you pressed " Add " to add a " Use to split piecemarks " schema entry or if you pressed " Delete " to delete a " Use to split piecemarks " schema entry, all members in the entire 3D model can optionally be marked for the piecemarking phase of Create Solids . This ensures that piecemarks will be properly re-assigned where appropriate. Why do I use the word "optionally"? Because after you press " OK ," a yes-no dialog opens. Pressing " Yes " on the dialog marks all members is the model for the piecemarking phase of Create Solids . Pressing " No " on the dialog stops the marking from taking place.

If you pressed " Details " and changed an " Add to member detail " schema entry from checked ( ) to unchecked ( ) or vice-versa or if you pressed " Add " and created a new " Add to member detail " schema entry or if you pressed " Delete " to delete an " Add to member detail " schema entry, then all members in your model can optionally be marked for detailing to ensure that their details are properly updated the next time you Detail Members . Why "optionally"? Because after you press " OK ," a yes-no dialog opens. Pressing " Yes " on the dialog marks all members is the model for the detailing. Pressing " No " on the dialog stops the marking from taking place.

closes this window without ever bringing up a yes-no dialog.

Members will not be marked for processing or detailing when you press " Cancel ."

As is true for pressing the " OK " button, any changes that you have made to a schema entry will have already been saved before you press " Cancel ." Consequently, those changes will still be shown on this window or the Add/Edit Schema Entry window the next time you open the window.

page 1 | contents | home > project settings > job > custom properties > | classic | top