A web extension plate for clip angles is designed to extend past the bottom of a beam's flange per choices made to "  Web Extension Plate " locks. The clip angles can bolt or weld to the extension plate.
|
(beam, web extension plates for clip angles, to a column or a beam)
(" Input connection type " = ' Clip angle' or ' Auto standard ' or ' User defined ')
(" Extend past flange " = ' If required ')
|
|
|
" Web Extension Plate "
 |
| Availability : " Web Extension Plate " connection design locks become available to users of a full-featured SDS2 program when the designed connection is a clip angle connection, regardless of whether or not the extension plate is required. If the extension plate is not required or " Extend past flange " is set to ' Never ', the connection design locks have null values (e.g., distances of ' 0 ') and no physical extension plate is designed. If the user of a full-featured SD/2 program then sets at least one of the null-value locks to a non-null value, a web extension plate will be designed around the user-entered values even if the web extension plate is still not required.
|
|
|
|
user defined | beam review | top
Connection design locks:
|
Locks not on the drawing are marked ( not depicted ).
|
Web Extension Plate
( for a clip angle on a beam framing to a column )
Horizontal to plate ( horz ):
Top of plate ( top ):
Plate length ( length ):
Plate width ( width ):
Plate thickness ( not depicted ):
Bottom cut width ( cut width ):
Bottom cut length ( cut length ):
Weld size ( weld ):
user defined | beam review | top