" End Plate " connection design locks

An end plate is designed per " End Plate " locks for the gusset-to-column connection in a vertical brace to beam & column framing situation when the beam-to-column connection is an ' End plate ' connection. On the beam, the end plate may be set to " Combine... " (not shown). On combined end plates, " Workpoint to... " and " Rows... " are the only settings.

(gusset-to-column end plate, vertical brace to beam & column) (vertical brace " Section size " = any valid shape) (" Input connection type " = ' Vbrc Plate ' or ' User defined ') (if the beam has an end plate, the gusset field bolts to the column with an end plate)
" End Plate " (an end plate is required on the beam)	" End Plate " ( FS | NS )
Related locks, vertical brace to beam & column: Gusset Beam Column Square (angle, tee or channel vertical brace) Gusset Beam Column (HSS, pipe or tube vertical brace) Gusset Beam Column (stem-vertical tee vertical brace) Gusset Beam Column (wide flange vertical brace, standard) Gusset Beam Column (wide flange vertical brace, paddle) Gusset Beam Column (wide flange vertical brace, claw angles)

user defined | vertical brace review

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  End Plate
(vertical brace to beam & column)

Work point to end plate (vertical) ( to end plate ):

End plate length ( length ):

End plate width ( width ):

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Workpoint to 1st hole (vertical) ( to 1st hole ):

Gage NS:

Gage FS:

Rows of bolts ( rows ):

Row spacing:

Top row edge ( top edge ):

Bottom row edge ( bttm edge ):

Columns of bolts ( columns ):

Column spacing:

Horizontal to 1st hole (horizontal):

Column edge NS:

Column edge FS ( edge FS ):

Weld

Weld size ( not depicted ):

user defined | vertical brace review | top