" Gusset One Member Square " & " Brace Connection To Gusset " & " Weld Conn2 "
An angle, W tee or channel vertical brace field bolts directly to a gusset plate per choices made to " Brace Connection To Gusset ." The corner of the gusset plate (" Gusset Beam Column Square ") is square under the brace because " Clip end operation " is set to ' No ' or, possibly, to ' Automatic '. Gusset-to-beam shop attachment is designed per locks in " Weld Conn2 " or, when applicable, " NS/FS Clip Conn2 ." |
|
|||
" Gusset One Member Square "
(gusset plate dimensions and location) |
" Brace Connection To Gusset "
(holes for field bolting the brace to the gusset) |
||
" Weld Conn2 "
|
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset One Member Square
( angle vertical brace to a beam )
( " Clip end operation " = ' No ' or possibly ' Automatic ' )
Gusset plate dimensions and location
Plate thickness ( not depicted ):
Obtuse side clip cut width ( obtuse cut width ):
user defined | vertical brace review | top
Brace Connection To Gusset
( L or WT or C vertical brace, to a beam )
Brace to gusset plate connection ( field bolted )
Bolt diameter ( not depicted ):
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( sp ):
Edge distance along brace ( edge dist ):
Distance to 1st hole perpendicular to brace ( not depicted ):
Weld Conn2
( L or WT or C vertical brace to a beam )
Shop weld, gusset plate to the supporting beam
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window. " NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ." |