" Gusset 2 Point Square " & " Brace Connection To Gusset " & " Weld Conn2 " connection design locks
An angle, W tee or channel vertical brace field bolts directly to a 2- or 3-point shared gusset plate per choices made to " Brace Connection To Gusset ." The corners of the gusset plate (" Gusset 2 Point Square ") are square due to " Clip end operation " being set to ' No ' or possibly ' Automatic '. The shared gusset shop attaches to the beam per choices made to " Weld Conn2 " or, when applicable, " NS/FS Clip Conn2 " locks. |
|
|||
" Gusset 2 Point Square "
(gusset plate dimensions and location) |
" Brace Connection To Gusset "
(hole pattern for field bolting the brace to the gusset) |
||
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset 2 Point Square
(angle vertical braces, 2- or 3-point, to a beam)
(" Clip end operation " = ' No ' or possibly ' Automatic ')
Gusset plate dimensions and location
Plate thickness ( not depicted ):
Left Brace [ member number ]
Refx:
Refx:
user defined | vertical brace review | top
Brace Connection To Gusset
(L or WT or C vertical braces, 2- or 3-point, to a beam)
Brace to gusset plate connection ( field bolted )
Bolt diameter ( not depicted ):
Distance to 1st hole along brace:
Hole spacing along brace ( row spacing ):
Edge distance along brace ( edge dist ):
Distance to 1st hole perpendicular to brace ( not depicted ):
user defined | vertical brace review | top
Weld Conn2
( angle, channel or WT vertical braces, 2- or 3-point, to a beam )
Shop weld, 2- or 3-point point gusset plate to the supporting beam
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."