" Gusset One Member Square " & " Brace Connection To Gusset " & " HB Conn2 "
An angle horizontal brace field bolts to its gusset plate per " Brace Connection To Gusset " locks. In this example, the gusset shop welds to the top flange of a beam. The gusset's dimensions are controlled by " Gusset One Member Square " locks. " Staggered " holes are shown in the example, but angle braces can have other hole patterns. The gage line (shown) or neutral axis aligns with an angle brace's work line . |
|
|||
" Gusset One Member Square "
(gusset plate dimensions and location) |
" Brace Connection To Gusset "
(holes for field bolting the brace to the gusset) |
||
" HB Conn2 "
(shop weld to the beam's top flange) |
|
Connection design locks :
Locks not on the drawings are marked ( not depicted ). |
Gusset One Member Square
(angle horizontal brace to a beam's top flange)
Plate thickness ( not depicted ):
Obtuse side clip cut width ( os cut width ):
user defined | horizontal brace review | top
Brace Connection To Gusset
(angle horizontal brace to a beam's top flange)
Bolt diameter ( not depicted ):
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( row spacing ):
Edge distance along brace ( edge dist ):
Distance to 1st hole perpendicular to brace ( not depicted ):
user defined | horizontal brace review | top
HB Conn 2
(gusset-to-beam shop weld)
Weld size ( weld ):