" NS/FS Clip Conn2 " connection design locks

Gusset clip angles to a beam web can be designed for a horizontal brace (any valid horizontal brace material type) per " NS Clip Conn2 " and/or " FS Clip Conn2 " locks when ' Clip angle ' is selected as the " Gusset to beam connection ."

(horizontal brace, gusset clip angles, to a beam's web) (horizontal brace " Section size " = any valid shape) (" Input connection type " = ' Hbrc plate ' or ' User defined ') (" Gusset to beam connection " = ' Clip angle ') (" Gusset clips on " = ' Both sides ' or ' Near side ' or ' Far side ')
" NS Clip Conn2 " (" Gusset to clip connection " = ' Bolted ')	" NS Clip Conn2 " (" Gusset to clip connection " = ' Welded ')
A negative (-) distance is entered to " Vertical to 1st row " and " Top of angle ."	Related locks : Gusset One Member Square (angle brace) Gusset One Member (HSS brace) Gusset One Member Square (WT, 2lL or W)

user defined | horizontal brace edit | top

---

Connection design locks :

Locks not called out or dimensioned on the drawing are marked ( not depicted ).

  NS or FS Clip Conn2
(horizontal brace gusset plate to a beam's web, clip angle connection)

Clip angle

Clip angle(s) can be on ' Both sides ' or ' Near side ' or ' Far side ' of the gusset plate. You get a leaf for "   NS Clip Conn2 " and another leaf named "   FS Clip Conn2 " when ' Both sides ' is selected.

Section size ( not depicted ):

Long leg to ( not depicted ):

Top of angle ( top ):

Length of angle:

Connection to supported (gusset clip angle, NS or FS, leg welded or bolted to the gusset plate) :

When " Connection specifications " > " Gusset to clip connection " is set to ' Welded ', you get a " Weld size " entry field, but no options for bolting:

Weld size ( weld ):

When the " Gusset to clip connection " is set to ' Bolted ', you get the following " Connection to supported " options for shop bolting the brace to the gusset plate. " Connection to supported " settings can be different than the entries made to " Connection to supporting " fields.

Bolt diameter ( not depicted ):

diameter of leg-to-gusset shop bolts

Hole type ( not depicted ):

Rows ( not depicted ):

Vertical to 1st hole ( not depicted ):

Vertical hole spacing ( not depicted ):

Top vertical edge distance ( not depicted ):

Bottom vertical edge distance ( not depicted ):

Horizontal to 1st hole ( h to 1st ):

Connection to supporting (gusset clip angle, NS or FS, leg that field bolts to the supporting beam's web) :

Regardless of whether the " Gusset to clip connection " is set to ' Welded ' or ' Bolted ', the connection to supporting is a field bolted connection with following options:

Bolt diameter ( not depicted ):

diameter of OSL field bolts

Hole type ( not depicted ):

Rows:

Vertical to 1st hole ( vert to 1st ):

Vertical hole spacing ( sp ): A single vertical spacing distance or variable hole spacing can be entered here.

VIDEO Variable hole spacing can be typed to locked " Vertical hole spacing " fields found in leaves named " Shear Tab "; " Bent Plate " " End Plate " and " NS/FS Clip Conn 2 " (Recorded in SDS2 Detailing , v2016.)

Rows	Spacing	Result
5	3,5,3,3	4 spaces at 3", 5", 3" and 3"
5	3,5,2@3	4 spaces at 3", 5", 3" and 3"
5	3,5,3	4 spaces at 3", 5", 3" and 3" (the last spacing -- 3 -- is repeated to fill the spaces that are required for the number of rows)
5	3,5,3,3,2,3	End connection failure message (see below).

End connection failure message: Variable row spacing specifies too many rows

Top vertical edge distance ( tved ):

Bottom vertical edge distance ( bved ):

Horizontal to 1st hole ( horz to 1st ):

user defined | horizontal brace edit | top