" Gusset One Member Perp " & " Brace Connection To Gusset " & " HB Conn2 "

Connection design provides " Gusset One Member Perp " locks when an angle horizontal brace is perpendicular to a beam web. " Brace Connection To Gusset " locks are provided for setting the brace-to-gusset bolt pattern. A different set of " HB Conn2 " locks is provided when ' Welded ' (shown), as opposed to ' Bolted ' (not shown), is selected as the " Gusset to beam connection ."

(L horizontal brace, bolted to gusset, perpendicular to a beam's web)
(horizontal brace " Section size " = angle)
(" Input connection type " = ' Hbrc plate ' or ' User defined ')
(" Stagger bolts " or " Stagger bolts ") (" Locate on neutral axis " = ' Yes ' or ' No ')
(" Gusset to beam connection " = ' Welded ' or ' Clip angle ')
" Gusset One Member Perp "
(gusset plate dimensions and location)

" Brace Connection To Gusset "
(If the gusset is ' Welded ' to beam, the brace field bolts to the gusset plate)



" HB Conn2 "
(" Gusset to beam connection " = ' Welded ')

Connection specification: When " Gusset to beam connection " in " Connection specifications " is set to ' Welded ', you get " HB Conn2 " locks. If the choice is ' Clip angle ', then leaf(s) named " NS Clip Conn2 " and/or " FS Clip Conn2 " become available.

Related locks :
NS/FS Clip Conn2 (gusset clip angle/s)

user defined | horizontal brace review | top

Connection design locks :

Locks not on the drawings are marked ( not depicted ).

    Gusset One Member Perp
(angle horizontal brace to a beam's web)

Plate thickness ( not depicted ):

Width ( plate width ):

Length ( plate length ):

Refx:

Refy ( not depicted ):

Flat width ( flat wd ):

Flat length:

Obtuse side clip cut width ( os cut width ):

Obtuse side clip cut length ( os cut length ):

user defined | horizontal brace review | top

    Brace Connection To Gusset
(angle horizontal brace perpendicular to a beam's web)

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows:

Distance to 1st hole along brace ( to 1st hole ):

Hole spacing along the brace ( rsp ):

Edge distance along brace ( edge dist ):

Columns:

Hole spacing perpendicular to brace ( sp ):

user defined | horizontal brace review | top

    HB Conn 2
(angle horizontal brace, perpendicular, shop welded to a beam's web)

You get " HB Conn2 " locks when ' Welded '' is selected for " Gusset to beam connection ." If ' Clip angle ' is selected, then leaf(s) named " NS Clip Conn2 " and/or " FS Clip Conn2 " become available instead of the " HB Conn2 " leaf.

Weld size ( weld ):

user defined | horizontal brace review | top