" Gusset 2 Point Square " & " Brace Connection To Gusset " & " HB Conn2 "
A 2- or 3-point shared gusset plate that shop attaches to the web of a beam is designed per " Gusset 2 Point Square " locks. Angle horizontal braces field bolt to the gusset per " Brace Connection To Gusset " locks. ' Welded ' (shown) or ' Clip angle ' (not shown) may be selected as the " Gusset to beam connection ." A 3-point gusset plate must shop weld to the beam, whereas a 2-point gusset can optionally shop attach to the beam's web with a clip angle. |
|
|||||||
" Gusset 2 Point Square "
(gusset plate dimensions and location) |
" Brace Connection To Gusset "
(holes for field bolting the brace to the gusset) |
||||||
" HB Conn2 " ( welded )
(" Gusset to beam connection " = ' Welded ') |
|
user defined | horizontal brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset 2 Point Square
(angle horizontal brace, 2- or 3-point, to a beam's web)
Plate thickness ( not depicted ):
Note: The member number [num] of the left horizontal brace is shown in brackets [num] in the heading for this section. |
Note: The member number [num] of the right horizontal brace is shown in brackets [num] in the heading for this section. |
user defined | horizontal brace review | top
Brace Connection To Gusset
(angle horizontal braces, 2- or 3-point, to a beam's web)
Bolt diameter ( not depicted ):
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along the brace ( s ):
Edge distance along brace ( ed ):
Distance to 1st hole perpendicular to brace ( not depicted ):
user defined | horizontal brace review | top
Brace Connection To Gusset
( angle horizontal braces, 2- or 3-point, shop welded to a beam's web )
You get " HB Conn2 " locks when ' Welded '' is selected for " Gusset to beam connection ." If ' Clip angle ' is selected, then leaf(s) named " NS Clip Conn2 " and/or " FS Clip Conn2 " become available instead of the " HB Conn2 " leaf. |
Weld size ( weld ): .