" Gusset One Member Square " & " Brace Connection To Gusset " & " HB Conn2 "
The gusset for a W tee or wide flange or double-angle horizontal brace to a beam web is designed per " Gusset One Member Square " locks. The brace connects to the gusset per " Brace Connection To Gusset " locks. The gusset-to-beam-web connection can be ' Welded ' (" HB Conn2 " -- shown), or attached with a ' Clip angle ' (" NS/FS Clip Conn2 "), depending on the choice made to " Gusset to beam connection ." |
|
|||
" Gusset One Member Square "
(gusset plate dimensions and location)
|
" Brace Connection To Gusset "
|
||
" HB Conn2 "
(" Gusset to beam connection " = ' Welded ') |
|
user defined | horizontal brace review | top
Connection design locks :
Locks not on the drawings are marked ( not depicted ). |
Gusset One Member Square
( W tee, 2L or W horizontal brace to a beam's web )
Plate thickness ( not depicted ): The " Material thickness " of the gusset plate.
Refy ( not depicted ):
Obtuse side clip cut width ( os cut width ):
user defined | horizontal brace review | top
Brace Connection To Gusset
( W tee, 2L or W horizontal brace to a beam's web )
Bolt diameter ( not depicted ):
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( row spacing ):
Edge distance along brace ( edge dist ):
Distance to 1st hole perpendicular to brace ( perp to ):
user defined | horizontal brace review | top
HB Conn2
( W tee, 2L or W horizontal brace, shop weld, gusset to a beam's web )
You get " HB Conn2 " locks when ' Welded '' is selected for " Gusset to beam connection ." If the choice is ' Clip angle ', then leaf(s) named " NS Clip Conn2 " and/or " FS Clip Conn2 " become available. |