" Gusset One Member " connection design locks

The gusset for an angle, double-angle, W tee or wide flange horizontal brace to a beam web is designed per " Gusset One Member " locks. The gusset can shop weld to a beam's web, or it can field bolt to the web with a clip angle.

(L or 2L or WT or W horizontal brace to a beam's web) (horizontal brace " Section size " = L, WT or W) (for an angle (L) brace, " Double material " = checked ( ) or not ( )) (" Input connection type " = ' Hbrc plate ' or ' User defined ') (" Gusset to beam connection " = ' Welded ' or ' Clip angle ') (" Clip end operation " = ' Yes ' or possibly ' Automatic ')
" Gusset One Member " ( gusset plate dimensions and location )	" Gusset One Member " ( acute side and obtuse side cuts )
Connection specification: When " Gusset to beam connection " in " Connection specifications " is set to ' Welded ', you get " HB Conn2 " locks. If the choice is ' Clip angle ', then leaf(s) named " NS Clip Conn2 " and/or " FS Clip Conn2 " become available.	Related locks : Gusset One Member Square Brace Connection To Gusset HB Conn2 (shop welding the gusset to the web) NS/FS Clip Conn2 (field bolting the gusset to the web)

user defined | horizontal brace review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

    Gusset One Member
( L, WT, 2L or W horizontal brace to a beam's web )

Plate thickness ( not depicted ):

Width ( plate width ):

Length ( plate length ):

Refx:

Refy ( not depicted ):

Connection cut width ( cut width ):

Connection cut length ( cut lngth ): .

Acute side clip cut width ( acute side cut width ):

Acute side clip cut length ( acute side cut length ):

Obtuse side clip cut width ( obtuse cut width ):

Obtuse side clip cut length ( obtuse cut length ):

Flat width ( flat ):

End distance ( end dist ):

Length acute side ( acute side ):

user defined | horizontal brace review | top