" Joist End Pocket " locks

A " Joist End Pocket " leaf may be found on the Joist Edit window when ' Bearing ' is the " Input connection type " AND that end of the joist frames to a concrete wall or tilt-up panel.

(joist, bearing connection, to a concrete wall or tilt-up panel) (" Input connection type " = ' Bearing '

A related dimension not in this leaf: The distance from the end of the joist to the interior face of the pocket is governed by the joist's " Top chord " field clearances, the default for which comes from Home > Project Settings > Job > Field Clearances > " End and pocket clearance ." That distance is not available here, in the " Joist End Pocket " leaf.

user defined | joist edit | top

---

Locks :

  Joist End Pocket
( settings for the dimensions of the pocket )

Erection clearances

Top:

Side:

Grout thickness ( grout ):

Pocket depth ( depth ):

user defined | joist edit | top