" Seated Tee " connection design locks

" Seated Tee " locks control the connection design of a W tee seat for a joist top chord.

(joist, top chord seated tee connection, to a column web or flange) (" Input connection type " = ' Seated ' or ' User defined ') " Top chord seated " = ' Tee '
" Seated Tee "	Setup: By default, the section size used as the top chord tee seat " Material " is one of the section sizes that is listed in Home > Project Settings > Fabricator > Standard Fabricator Connections > Preferred WT Sizes . Related locks : Seated Plate Seated Angle Joist Stabilizer Plate Joist Stabilizer Angle

user defined | joist review

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

Seated Tee

Tee

Length:

Material ( not depicted ):

Bolts in seat

Diameter ( not depicted ):

Hole type ( not depicted ):

Rows :

Horizontal to holes ( minus to holes ):

Gage:

Welds

Seat ( not depicted ):

user defined | joist review | top