" Gusset 2 Point " & " Weld Conn2 " connection design locks
Wide flange vertical braces can be designed with a shared gusset that shop attaches to a beam when ' Standard ' is the " Connection arrangement ." The gusset may be for 2-point bracing (" Gusset 2 Point ") or 3-point bracing (not shown). The gusset can weld to the beam (" Weld Conn2 ") or, if 2-point, bolt with a clip angle (" NS/FS Clip Conn2 "). |
|
||||
" Gusset 2 Point "
(gusset plate dimensions and location) |
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
|||
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset 2 Point
( wide flange vertical braces, 2- or 3-point, standard connection, to a beam )
Gusset 2 Point
Plate thickness ( not depicted ):
Left Brace [ member number ]
Right Brace [ member number ]
Refx ( right refx ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
user defined | vertical brace review | top
Weld Conn2
(wide flange vertical braces, 2- or 3-point, standard connection, to a beam)
Shop weld, gusset to the supporting beam
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."