| These locks apply to a user base/cap plate on a column that does not frame to anything. Assuming that the " Plate rotation " is set to ' 0 ' (zero), " Plate length " is parallel with the column web. The " Column rotation " rotates the user base/cap plate along with the column.
|
For user base/cap plates in column-to-beam or column-to-joist framing situations, see "  Column Plate ."
|
|
|
|
" Column Plate "
|
 |
| When a column end with a user base/cap plate frames to nothing and the " Plate rotation " is set to ' 0 ' (zero), the " Plate length " of the column plate runs parallel with the web of the column. The " Column rotation " rotates the base/cap plate along with the column.
|
|
 |
| Hole settings for a user base / cap plate originate from Home > Project Settings > Job > Base / Cap Plate Schedule . Changing a connection design lock (here, in Modeling ) does not affect the Base / Cap Plate Schedule .
|
|
|
|
user defined | column review | top
Connection design locks :
|
Locks not on the drawing are marked ( not depicted ).
|
Column Plate
Plate dimensions (user base/cap plate, nothing framed to)
Plate length ( length ):
|
For a base/cap plate that does not frame to a beam or joist and whose " Plate rotation " is ' 0 ', " Plate length " is parallel with the column web.
|
Plate width ( width ):
|
For a base/cap plate that does not frame to a beam or joist and whose " Plate rotation " is ' 0 ', " Plate width " is parallel with the column flanges.
|
Plate thickness ( not depicted ):
All bolts
Bolt diameter ( not depicted ):
|
diameter
|
|
Hole diameter ( not depicted ):
Hole type ( not depicted ):
Columns:
3 columns of holes
|
4 columns of holes
|
Horizontal spacing:
|
x = " Horizontal spacing "
|
Rows:
2 rows of holes
|
3 rows of holes
|
Vertical spacing:
|
Y = " Vertical spacing "
|
user defined | column review | top