" Gusset One Member Square " & " Brace Connection to Gusset " & " Weld Conn2 "
An L (shown) or WT or C vertical brace field bolts directly to its gusset plate per " Brace Connection to Gusset " locks. The corner of the gusset (" Gusset One Member Square ") is square under the brace due to " Clip end operation " being set to ' No ' or, possibly, to ' Automatic '. The gusset plate shop attaches to a column. |
|
|||
" Gusset One Member Square "
(gusset plate dimensions and location) |
" Brace Connection To Gusset "
(holes for field bolting the brace to the gusset) |
||
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset One Member Square
(angle vertical brace to a column)
(" Clip end operation " = ' No ' or possibly ' Automatic ')
Gusset plate dimensions and location
Plate thickness ( not depicted ):
Obtuse side clip cut width ( obtuse cut width ):
user defined | vertical brace review | top
Brace Connection To Gusset
( L, WT or C brace to a column )
Brace to gusset plate connection (field bolted)
Bolt diameter ( not depicted ):
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( row spacing ):
Edge distance along brace ( edge dist ):
Distance to 1st hole perpendicular to brace ( not depicted ):
user defined | vertical brace review | top
Weld Conn2
( L, WT or C vertical brace to a column )
Shop weld, gusset plate to the supporting column
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."