" Gusset One Member " & " Weld Conn2 " connection design locks

A stem-vertical W tee vertical brace field bolts with web plates to a gusset plate (" Gusset One Member ") that shop attaches to a beam (" Weld Conn2 " or " NS/FS Clip Conn 2 "). The brace's work line runs through the bolt column nearest the tee flange.

(stem-vertical WT vertical brace, web plates field bolted to gusset, to a beam) (vertical brace " Section size " = W tee) (" Stem orientation " = ' Vertical ')   (" Stem direction " = ' Down ' or ' Up ') (" Input connection type " = ' Vbrc Plate ' or ' User defined ')
" Gusset One Member " (gusset plate dimensions and location)	" Gusset One Member " (acute side and obtuse side cuts)
" Weld Conn2 " (" Gusset to supporting member " = ' Welded ')	The gusset plate shop welds to the beam as specified by the " Weld Conn2 " locks. Alternatively, the gusset plate can shop bolt to the beam as spcified by the " NS/FS Clip Conn2 " locks. Whether you get " Weld Conn2 " locks or " NS/FS Clip Conn2 " locks depends on the choice made to " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window. Related locks : Brace Connection To Gusset Wtee Brace Connection To Gusset NS/FS Clip Conn2 (alternative to " Weld Conn2 ")

user defined | vertical brace review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Gusset One Member
( stem-vertical W tee vertical brace, to a beam )

Gusset plate dimensions and location

Plate thickness ( not depicted ):

Width ( plate width ):

Length ( plate length ):

Refx:

Refy:

Connection cut width ( cut width ):

Connection cut length ( cut length ):

Acute side clip cut width ( acute side cut width ):

Acute side clip cut length ( acute side cut length ):

Obtuse side clip cut width ( obtuse cut width ):

Obtuse side clip cut length ( obtuse cut length ):

Flat width ( flat w ):

End distance ( not depicted ):

Length acute side ( not depicted ):

user defined | vertical brace review | top

---

  Weld Conn2
( stem-vertical W tee vertical brace, to a beam )

Shop weld, gusset plate to the supporting beam

Weld size ( weld ):

" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under the " Connection specifications " section on the Vertical Brace Review window. " NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."

user defined | vertical brace review | top