" Gusset One Member " & " Weld Conn2 " connection design locks
A stem-vertical W tee vertical brace field bolts with NS and FS web plates to a gusset plate (" Gusset One Member ") that shop attaches to a column. The W tee brace may be stem ' Down ' (shown) or stem ' Up ' (not shown). The brace's work line runs through the bolt column nearest the tee flange. The gusset plate can shop weld to the column (" Weld Conn2 ") or shop bolt with a clip angle (" NS/FS Clip Conn2 "). |
|
|||
" Gusset One Member "
(gusset dimensions and location) |
" Gusset One Member "
(acute side and obtuse side cuts) |
||
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset One Member
(stem-vertical teevertical brace, web plates, to a column)
Gusset plate dimensions and location
Plate thickness ( not depicted ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
Acute side clip cut width ( acute side cut width ):
Acute side clip cut length ( acute cut length ):
Obtuse side clip cut width ( obtuse cut width ):
Obtuse side clip cut length ( obtuse cut length ):
End distance ( not depicted ):
Length acute side ( not depicted ):
user defined | vertical brace review | top
Weld Conn2
( stem-vertical tee vertical brace to a column )
Shop weld, gusset plate to the supporting column
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."