" Gusset Column Cap " connection design locks
An angle, W tee or channel vertical brace field bolts directly to a gusset plate (" Gusset Column Cap ") that shop attaches to a column & base plate (shown) or a column & cap plate (not shown). The gusset's corner is clipped pependicular to the brace's workline due to " Clip end operation " being set to ' Yes ' or, possibly, to ' Automatic '. Gusset-to-column and gusset-to-column-plate shop welding is per choices made to " Weld Conn2 " and " Weld Conn1 ." If the column is perfectly vertical, the gusset's " Width " is measured horizontally. |
|
|||
" Gusset Column Cap "
(gusset plate dimensions and location) |
" Gusset Column Cap "
(cuts to the gusset plate) |
||
" Weld Conn2 " and " Weld Conn1 "
(shop welding the gusset plate to the column and the column plate) |
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset Column Cap
( angle, W tee or channel vertical brace to a column & base/cap plate )
Plate thickness ( not depicted ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
Clip column side cut width ( cs cut width ):
Clip column side cut length ( cs cut length ):
Clip beam side cut width ( bs cut width ):
Clip beam side cut length ( bs cut length):
Slope clip cut width ( slope cut width ):
user defined | vertical brace review | top
Weld Conn2
(angle, W tee or channel vertical brace to a column & base/cap plate)
Shop weld, gusset to the supporting column
Weld size ( weld2 ):
user defined | vertical brace review | top
Weld Conn1
( angle, W tee or channel vertical brace to a column & base/cap plate )
Shop weld, gusset to the column plate
Weld size ( weld1 ):
For an auto base/cap plate: