" Gusset One Member " & " Brace Connection To Gusset Wide Flange Flange Plate " & " Weld Conn2 "
NS and FS gusset plates field bolt to the left and right flanges of a web-horizontal wide flange vertical brace and are designed per " Gusset One Member " and " Brace Connection To Gusset Wide Flange Flange Plate " locks when ' Flange gussets ' is the selected " Connection arrangement ." The near-side flange gusset is shown in this example. The two gusset plates shop attach to the column per choices made to " Weld Conn2 " or " NS/FS Clip Conn2 " locks. |
|
|||||
" Gusset One Member "
(gusset plate dimensions and location) |
" Gusset One Member "
(acute side and obtuse side cuts) |
||||
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
" Brace Conn To Gusset Wide Flange Flange Plate "
(hole pattern for field bolting brace to gussets) |
||||
|
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset One Member
(web-horizontal wide flange vertical brace, flange gussets, to a column)
Gusset plate dimensions and location
Plate thickness ( not depicted ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
Acute side clip cut width ( acute side cut width ):
Acute side clip cut length ( acute cut length ):
Obtuse side clip cut width ( obtuse cut width ):
user defined | vertical brace review | top
Brace Connection To Gusset Wide Flange Flange Plate
(web-horizontal wide flange vertical brace, flange gussets, to a column)
Brace connection to the gusset plate (field bolted)
Bolt diameter ( not depicted ):
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( row spacing ):
Edge distance along brace ( edge dist ):
Other edge distance along brace ( other edge dist ):
user defined | vertical brace review | top
Weld Conn2
(web-horizontal wide flange vertical brace, flange gussets, to a column)
Shop weld, flange gusset plates to the supporting column
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."
A special case : If the supporting column has a narrow flange and ' Welded ' is selected for " Gusset to supporting member ," the flange gussets may shop weld to the supporting column's flange with clip angles.