The Sequence Names window

• This window opens when you press the " Sequence Names ... " button on the Zone and Sequence window.
• You cannot add sequence names to the window. You can only edit the names of existing sequences. Also, you cannot add duplicate sequences since doing so could cause the same-named sequences to appear in different zones.
• Sequence names can be up to 20 characters in length.
• To add sequences, see " Maximum sequences ."
• The default " Sequence " assigned to members newly added after you first start up Modeling is the sequence listed in line 1 of this list.
• See the step-by-step instructions .

Also see :

• Maximum sequences (sets number of names available)
• Edit Sequence (click button to open this window)
• Text entry widgets (shortcuts for editing tables and entry fields)
• Detail Sheet Autoloading (optionally renames pcmks by seq)

page 1 | contents | press "sequence names" on the zone and sequence window

---

Step-by-step instructions :

1 . Open the Zone and Sequence window and do the following:

1a : Confirm that you have entered the correct number to " Maximum sequences ." The number you enter to " Maximum sequences " sets the number of sequences that you can assign descriptions to.

1b : Press the " Sequence Names ... " button. Go to step 2

2 . The Sequence Names window opens. You can only use this window to edit sequences that already exists. Sequence names can be up to 20 characters in length.

#	Sequence Name
The index numbers (1, 2, 3, etc.) of the sequences.The sequence assigned to members newly added after you first start up Modeling will be the sequence listed in line 1.	If you change a sequence already assigned to members, the new name will be applied to all members which had the previously assigned name.
To edit a sequence, double-click the entry in the cell you want to change, press Backspace , type in the revised sequence (e.g. '3rdfloor' or 'main_bldg' or 'southwing' or 'potato'). Press Tab to log the entry and go on to the next cell. Shift + Tab backs you up a cell.

3 . When you are done editing definitions on the Sequence Names window, press one of the following buttons:

"OK" (or the Enter key) closes this window and saves any changes you have made.

Members which had been assigned a sequence associated with a particular line that you edited on this window will automatically be reassigned the new sequence name you entered.

"Cancel" (or the Esc key) closes this window without saving any changes made to it.

"Reset" undoes all changes made to this window since you first opened it. The window remains open.

page 1 | contents | press "sequence names" on the zone and sequence window | top