The Detail Erection View Defaults for Site Planning window ( Fabricator Settings )

• For erection views that were created in SDS2 Site Planning and reside in your current Job , this window sets the default settings that populate the Detail Erection Views window.

• Erection views that were created in SDS2 Site Planning may or may not be made to be shown on the erection view selection dialog that opens for auto detailing an erection view. You can show such erection views by checking the box for " Show Erecto r " on that selection dialog.
• To review the settings on the Detail Erection Views window before auto detailing an erection view, you can press the " Settings " button.
• Erection views that are created in SDS2 Site Planning generally depict crane placements. For this reason, help for those stations frequently refers to erection view drawings as erection view crane placement drawings.

To open Detail Erection View Defaults for Site Planning :

Method 1 : Home > Project Settings > Fabricator > Detailing > Detail Erection View Defaults for Site Planning .

Methods 2, 3 & 4 : In Modeling or the Drawing Editor , choose Settings > Fabricator Settings > Detail Erection View Defaults for Site Planning (classic), or use a keyboard shortcut , or click the icon.

Password protection: If a password has been set using the Change Setup Password utility, you can open this window only if you first enter that exact password.

page 1 | contents | home > project settings > fabricator > detailing > | classic | top