The Beam Flange to Flange Connection custom component

• Click here for help documentation on the Beam Flange to Flange Connection custom component from the SDS2 Detailing help manual.
• You cannot add or modify a custom component in Site Planning. You can review component settings.
• The " Pattern " of bolts for a beam flange to flange component can be specified in a full-featured SDS2 program to be ' 4 bolts ' or ' 2 bolts ' or ' 2 bolts staggered long ' or ' 2 bolts staggered short '

Filler plates are used in these examples to fill the gap between the beams whose flanges are being bolted.

page 1 | contents | component (beam)