The Preferred WT Sizes setup window ( Fabricator Settings ) (read-only)

• This read-only window lists WT section sizes that are available in your current Fabricator .
• W tee section sizes must be entered to this list in order for tee seats and/or tee shear connections to be designed in a full-featured SDS2 program when this same Fabricator file is used in that program.
• If appropriate sizes are not on this list, connection design will default to plate material.
• See to open this window .

Also see :

• W tee (type of material listed on this window)
• tee shear (designed with tees on this list)
• beam tee seat (designed with tees on this list)
• joist top chord tee seat (designed with tees on this list)
• Connection material for tees (steel grade for tees on list)

contents | home > project settings > fabricator > std fab conns > preferred sizes >

---

To open Preferred WT Sizes :

Method 1 : Home > Project Settings > Fabricator > Standard Fabricator Connections > Preferred Connection Material Sizes > Preferred W Tee Sizes .

contents | home > project settings > fabricator > std fab conns > preferred sizes > | top