Sheet List, Select by Detail ( data comes from detail / gather / erection sheets )

Tool summary :

  • Reports the sheets that the member details or submaterials or erection views that you select have been placed on, and which drawings have not yet been placed on sheets.
  • The example shown below is a Sheet List by Detail report on member details. Separate reports could be output for submaterials and erection views.

    The member details B_6 and B_6 and B_3 are each on two different sheets. B_52 and B_53 and B_54 are not on any sheets.
  • See the step-by-step instructions .

Also see :

home > reports > system reports > sheets > | reports > sheet loading > | top

   How to output a Sheet List by Detail :

A Sheet List by Detail is an excellent report for double-checking the placement of details on sheets. It can help you pinpoint potential problems such as a single detail placed on multiple sheets.

1 . Please note that the user of a full-featured SDS2 program affects information on this report in the following ways:

1a : A Sheet List by Detail can be generated after member details or submaterial details or erection view drawings have been auto detailed in a full-featured SDS2 program. You cannot auto detail in an SDS2 review station .

2 . Use any one (1) of the following methods to begin output of this report:

Method 1 : Home > Reports > System Reports > Sheets > Sheet List, Select by Detail .

Method 2 : Click the Sheet List, Select by Detail icon, which is pictured above. The icon can be taken from the group named ' Reports ' and placed on a toolbar (classic) or the ribbon (lightning). Ribbon configuration is done using Customize Interface .

Method 3 : If " Modeling layout style " or " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Reports > Sheet Loading > Sheet List, Select by Detail.

3 . A selection dialog opens. By default, " Details " is selected, and the list shows those member details in your current Job that are up to date and therefore not marked for detailing.

 B_11
 B_12
B_17
 B_22
 B_23
 B_26
  
Optional : " Hide ... " and " Show All " can adjust which members are listed. The button under " Destination " can be used to output the report to a device or location other than that which is set by User and Site Options > Output > " Reports ."

Alternative 1 : Select " Details " or " Submaterial " or " Erection Views " to list member details, submaterial details or erection view details (whichever you want), then select the details you want the report to be based on. Press " OK " to output the report as described in step 4.

Alternative 2 : Press " Cancel " to end this operation without generating a report. Do not continue.

4 . The Sheet List by Detail is output.

Note: If you output the report to the report viewer, you can now review the report on screen then optionally print it or output it to disk (see report viewer ).

home > reports > system reports > sheets > | reports > sheet loading > | top