Review: Add Bevel Symbol

Bevel Add ( Drawing Editor )

Tool summary :

Draws a bevel symbol. The bevel angle, size and orientation of the symbol is based on the two points that you locate.
The first point positions the tail; the second point is where the triangle part of the symbol will be drawn.
In an SDS2 review station, objects such as bevel symbols are automatically added to comment layers and cannot be moved to non comment layers.
The bevel " Angle " is determined by the points you lay out for the bevel symbol. " Rise " or " Run " is the " Bevel symbol base dimension " in Detailing Symbol Settings . Other defaults are set by the last bevel symbol you added or edited.
See (on this page):
- Quick instructions
- Detailed instructions

Also see :

Bevel Symbol window (opened with Bevel Add )
Bevel symbol base dimension (setup for Bevel Add )
Show bevel angle degrees (setup for Bevel Add )
Bevel symbol exact points (defined with Bevel Add )
Comment layer (objects can be added to this type of layer)

Quick instructions (also see the detailed instructions ) :

	1 . Left-click ( Locate ) to place the tip of the bevel symbol's tail.
	2 . Left-click ( Locate ) where you want the bevel symbol.
	3 . The program calculates the angle, rise and run from the located points.
	4 . The program draws the bevel symbol. You can now middle-click ( Repeat ) to place a duplicate bevel symbol. Or left-click ( Locate ) to place another bevel symbol. Or right-click ( Return ) if you are done.

Detailed instructions (also see the quick instructions ) :

The following instructions assume that you are using a 3-button mouse.

1 . Invoke Bevel Add using one (1) of the following methods:

Method 1 : Click the Bevel Add icon. The icon can be taken from the group named ' Objects -- Arcs ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Objects > Bevel Symbols > Add .

Method 3, 4 or 5 : Bevel Add can also be invoked using a keyboard shortcut , the context menu , or a mode . For the ' Lightning ' layout style, configuration of the interface is done using Customize Interface .

Method 6 : With Bevel Mode mouse bindings active, middle-click ( Add ).

2 . Locate - Repeat - Return mouse bindings become active along with various Locate options.

bindings

Alternative 1 : Select the Locate icon that you want (if it's not pressed already). Place the mouse pointer ( ) so that the point location target ( ) snaps to where you want the tip of the bevel symbol's tail, then left-click ( Locate ).

Alternative 2 : Right-click ( Return ) if you do not want to add any more bevel symbols. Do not continue.

3 . The status line prompts, " Locate second point ." Locate- Pan -Return mouse bindings become active.

bindings

3a : Place your mouse pointer ( ) so that the point location target ( ) snaps to where you want the tail to end and the part of the symbol that is a triangle to begin, then left-click ( Locate ).

4 . The Bevel Symbol window opens.

Alternative 1 : Make appropriate entries to " Angle ," " Rise ," " Run ," " Tails shown " and " Character height ," then press the " OK " button at the bottom of the window and go to step 5.

Alternative 2 : Press the " Cancel " button to end the Bevel Add operation without adding this bevel symbol. Do not continue.

5 . The bevel symbol is drawn on your computer screen. Locate - Repeat - Return mouse bindings become active. Do one (1) of the following:

bindings

Alternative 1 : To place another bevel symbol that is not a duplicate of the one you just added, follow these instructions beginning with step 2.

Alternative 2 : Middle-click ( Repeat ) to cause an exact duplicate of the bevel symbol to be drawn from whatever location the point location target ( ) is at. Do this as many times as you like, then right-click ( Return ) and go to step 6.

Alternative 3 : Right-click ( Return ) if you are done adding bevel symbols. Go to step 6.

6 . The mouse bindings that were active when you invoked Bevel Add become active again.

Note: Any bevel symbols added using this procedure can be instantly removed (one at a time, in reverse-order of their addition) by using Undo .