Clevis material
Shape file specifications :
|
d = tap diameter
w = width p = pin diameter b = outside diameter t = thickness n = tap grip a = inside to pin center |
Other shape file specifications: " Clevis Number " is the number referenced in the " Section Size " and relates to the outside diameter (b). For example, if the " Section Size " is ' CV2 1/2 ', the " Clevis Number " is ' 2.5 '. " Weight " is the actual weight of the clevis that will be entered as the " Unit Weight " in the bill of material. " Capacity " is the nominal strength of the clevis used in the design of rod bracing .
Settings that are not in the local shape file are defined on the Clevis Material window. In an SDS2 review station , these additional settings, as well as the shape file specifications, are read-only.
Example from the 3D model :
Submaterial piece marking : The default material mark prefix for clevis material, is cv .