The Reduced Beam Section window

• Click here for help documentation on the Reduced Beam Section custom component from the SDS2 Detailing help manual.
• The Reduced Beam Section review window provides custom component settings. You cannot add or modify a custom component in an SDS2 review station. You can review component settings.
• To open the Reduced Beam Section review window, you need to use the Model Tree . The custom component will be listed in the Model Tree as Reduced Beam Section when " View By " is set to ' Member piecemark ' or ' Member number '. The Safety Holes component will be listed under its beam, after that beam's connection components ( Left End and Right End ), and before that beam's submaterials, welds and bolts.

The Reduced Beam Section custom component is also a " Component " of whatever beam the component was added to in a full-featured SDS2 program . This means that another way to review the cut settings is to open the Beam Review window.

page 1 | contents | component (beam)