Hole Sym Add ( Drawing Editor )

Tool summary :

  • Draws a hole symbol or slot symbol. The symbol is defined on the Hole Symbol Input window.
  • In a review station, objects such as hole symbols are automatically added to a drawing's comment layer and cannot be moved to a non-comment layer.
  • Here's an example:

     hole symbol
    slot symbol
    		Hole Sym Add can add hole symbols or slot symbols. The symbol can be placed to the " Right " or " Left " or " Top " or " Bottom " of the single exact point that you locate.
  • See the step-by-step instructions .

Also see :

page 1 | objects > hole symbols > | objects -- hole symbols | xxx add | hole symbols

   Step-by-step instructions :

Hole Sym Add can be used to add to a hole symbol or slot symbol to any selected comment layer in your current Drawing Editor drawing. The following instructions assume that you are using a 3-button mouse.

1 . Invoke Hole Sym Add using any one (1) of the following methods:

Method 1 : Click the Hole Sym Add icon. The icon can be taken from the group named ' Objects -- Hole Symbols ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Objects > Hole Symbols > Add .

Method 3, 4 or 5 : Hole Sym Add can also be invoked using a keyboard shortcut , the context menu , or a mode . For the ' Lightning ' layout style, configuration of the interface is done using Customize Interface .

2 . Locate - Repeat - Return mouse bindings become active along with various Locate options.

bindings

Alternative 1 : Select the Locate icon that you want (if it's not pressed already). Place the mouse pointer ( ) so the point location target ( ) snaps to the location snaps to the location where you want the " Symbol location " of the hole symbol to be, then left-click ( Locate ). Go to step 3.

Alternative 2 : Middle-click ( Repeat ) to add a hole symbol that is exactly like the preview of a hole symbol that is shown. Skip step 3 and go directly to step 4.

Alternative 3 : Right-click ( Return ) if you do not want to add any more hole symbols. Do not continue.

3 . The Hole Symbol Input window opens.

Alternative 1 : Enter the hole symbol settings that you want and press the " OK " button at the bottom of the window to cause the hole symbol to appear on screen. Go to step 4.

Alternative 2 : Press the " Cancel " button to end the Hole Sym Add operation without adding this hole symbol. Do not continue.

4 . Locate - Repeat - Return mouse bindings again become active along with various Locate options. Do one of the following:

bindings

Alternative 1 : Follow these instructions beginning with step 2 to place additional hole symbols with different settings than the one you just added.

Alternative 2 : Middle-click ( Repeat ) to cause a duplicate of the hole symbol you just added to be placed where the point location target ( ) is at. Do this as many times as you like, then right-click ( Return ) and go to step 5.

Alternative 3 : Right-click ( Return ) if you are done adding hole symbols. Go to step 5.

5 . The mouse bindings that were active when you invoked Hole Sym Add become active again.

Note: Any hole symbols added using this procedure can be instantly removed (one at a time, in reverse-order of their addition) by using Undo .

page 1 | objects > hole symbols > | objects -- hole symbols | xxx add | hole symbols | top