Beaded flat material (topic)
Shape file specifications :
L = leg length
tt = thickness at toetw = web thickness
d = depthOther shape file specifications: " Weight per Unit " (lbs/ft or kg/m), " Structural Properties ."
Additional settings to the specifications found in the local shape file are defined on the Rolled Section Material window. These additional settings are read-only in SDS2 Site Planning.
Submaterial piece marking : The default submaterial mark prefix for miscellaneous materials, including beaded flat material, is m .
Reviewing beaded flat sections in the model : Users of a full-featured SDS2 program can add beaded flat material to the model as a miscellaneous member or a submaterial. You cannot add or remove materials from the model in Site Planning. Settings for a beaded flat that are in addition to specifications applied in Shapes Properties can be reviewed on the Rolled Section Material window.