Review: All to Solid Trans

Change All to Solid Transparent ( Modeling )

Tool summary :

Changes the display style of potentially all members in your current view to solid transparent. Members that require solids to be created will not be changed.
Solid transparent is a member display style that features transparent member main material and transparent connection material.

The same view before (left) and after (right) doing a Change All to Solid Transparent .
Before using this tool, you may want to turn Depth Checking off (if you want to change more members) or on (if you want to change fewer members).

Also see :

Solids Creation (required for member solids display)
Solids Display Method (setup for solids display)
Depth Checking (affects Change All to Solid Transparent )
Reasons to display members in a solid form (topic)
Examples of the three solid forms (topic)

page 1 | contents | view > | view -- solids mode | member styles

Step-by-step instructions :

1 . Invoke Change All to Solid Transparent using any one (1) of the following methods:

Method 1 : Click the Change All to Solid Transparent icon, which is pictured above. The icon can be taken from the group named ' View -- Solids Mode ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Modeling layout style " is ' Classic ', you can use the menu system to choose View > Change All to Solid Transparent .

Method 3, 4 or 5 : Change All to Solid Transparent can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode . For the lightning interface, this configuration is done using Customize Interface .

2 . ALL members in your current view (except those that have not yet undergone Create Solids ) are displayed in solid transparent form (both main material and connection material are transparent).

Tip: When you Open ( Ctrl + o ) other views, you will find that members changed to solid transparent form in your current view are also be displayed in solid transparent form in those other views.