" Gusset One Member " & " Weld Conn2 " connection design locks

An angle, W tee or channel vertical brace field bolts directly to a gusset plate (" Gusset One Member ") that shop attaches to a beam. The gusset's corner is clipped pependicular to the brace's workline due to " Clip end operation " being set to ' Yes ' or, possibly, to ' Automatic '. Gusset-to-beam shop attachment is per choices made to " Weld Conn2 " or " NS/FS Clip Conn2 " locks.

(L, WT or C vertical brace, field bolted to gusset, to a beam)
(vertical brace " Section size " = angle, W tee or channel)
(" Input connection type " = ' Vbrc Plate ' or ' User defined ')
(" Clip end operation on angle brace gusset " = )
and/or (" Clip end operation on W tee brace gusset " = )
and/or (" Clip end operation on channel brace gusset " = )
" Gusset One Member "
(gusset plate dimensions and location)

" Gusset One Member "
(acute side and obtuse side cuts)


" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ')

Related locks :
Gusset One Member Square (tee or channel)
Gusset One Member Square (angle)
Brace Connection To Gusset (angle)
NS/FS Clip Conn2 (any vertical brace material type)

user defined | vertical brace review

Connection design locks :

  Gusset One Member
( angle, W tee or channel vertical brace to a beam )

Gusset plate dimensions and location

Plate thickness ( not depicted ):

Width ( plate width ):

Length ( plate length ):

Refx:

Refy:

Connection cut width ( cut width ):

Connection cut length ( cut len ):

Acute side clip cut width ( acute side cut width ):

Acute side clip cut length ( acute side cut length ):

Obtuse side clip cut width ( obtuse cut width ):

Obtuse side clip cut length ( obtuse cut length ):

Flat width ( flat w ):

End distance ( end ):

Length acute side ( acute side ):

user defined | vertical brace edit | top

  Weld Conn2
( angle, W tee or channel vertical brace to a beam )

Shop weld, gusset plate to the supporting beam

Weld size ( weld ):

You get a weld (" Weld Conn2 "), when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.

You get a clip angle (" NS/FS Clip Conn2 "), when ' Clip angle ' is selected for " Gusset to supporting member ."

user defined | vertical brace edit | top