" Beam End Pocket " locks
A " Beam End Pocket " leaf may be found on the Beam Edit window when ' Bearing ' is the " Input connection type " and an " Embed schedule entry " has been made and that end of the beam frames to a concrete wall or panel. |
|
|||
|
Please note: Beam embed bearing plates / angles / channels are not designed connections. The process by which a beam end pocket is created parallels the process of connection design, but the bearing embeds are custom members , not SDS2 system connections.
Also see: The distance from the end of the beam to the interior face of the pocket is governed by the beam's " Input minus dimension ." The default minus dimension is recorded as the beam's " Automatic minus dimension ," which is derived from Home > Project Settings > Job > Field Clearances > " End and pocket clearance ." That distance does not directly relate to any lock in the " Beam End Pocket " leaf.
user defined | beam review | top
Locks :
Beam End Pocket
Erection clearances