" Gusset one Member Square " & " Brace Connection To Gusset " & " HB Conn2 "

An angle horizontal brace field bolts to a gusset plate that shop welds to the web of a beam when ' Welded ' is selected as the " Gusset to beam connection ." A " Stagger bolts " hole pattern is shown in the example below, but angle braces can have other hole patterns.

(L horizontal brace to a beam's web)
(horizontal brace " Section size " = angle)
(" Clip end operation " = ' No ' or possibly ' Automatic ')
(" Input connection type " = ' Hbrc plate ' or ' User defined ')
(" Stagger bolts " = or )
(" Locate on neutral axis " = ' Yes ' or ' No ')
(" Gusset to beam connection " = ' Welded ' or ' Clip angle ')
" Gusset One Member Square "
(gusset plate dimensions and location)

" Brace Connection To Gusset "
(If the gusset is 'Welded ' to beam, the brace
field bolts to the gusset)

" HB Conn2 "
(" Gusset to beam connection " = ' Welded ')



Connection specification: When " Gusset to beam connection " in " Connection specifications " is set to ' Welded ', you get " HB Conn2 " locks. If the choice is ' Clip angle ', then leaf(s) named " NS Clip Conn2 " and/or " FS Clip Conn2 " become available.

Related locks :
NS/FS Clip Conn2 (field bolting the gusset to the web)

user defined | horizontal brace review | top

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Gusset One Member Square
(angle horizontal brace to a beam web)

Plate thickness ( not depicted ):

Width ( plate width ):

Length ( plate length ):

Refx:

Refy ( not depicted ):

Obtuse side clip cut width ( os cut width ):

Obtuse side clip cut length ( os cut length ):

Flat length:

End distance ( end dist ):

Length acute side:

user defined | horizontal brace review | top

  Brace Connection To Gusset
(angle horizontal brace to a beam web)

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows:

Distance to 1st hole along brace ( to 1st hole ):

Hole spacing along brace ( row spacing ):

Edge distance along brace ( e dist ):

Columns:

Distance to 1st hole perpendicular to brace ( not depicted ):

Hole spacing perpendicular to brace ( col spacing ):

user defined | horizontal brace review | top

  HB Conn2
(angle horizontal brace to a beam web)

You get " HB Conn2 " locks when ' Welded '' is selected for " Gusset to beam connection ." If ' Clip angle ' is selected, then leaf(s) named " NS Clip Conn2 " and/or " FS Clip Conn2 " become available instead of the " HB Conn2 " leaf.

Weld size ( weld ):

user defined | horizontal brace review | top