" Gusset 2 Point " connection design locks
NS and FS shared gusset plates field bolt to the left and right flanges of web-horizontal wide flange vertical braces and are designed per " Gusset 2 Point " locks when ' Flange gussets ' is the selected " Connection arrangement ." The near-side flange gusset is shown in this example. The two gusset plates shop attach to the column per choices made to " Weld Conn2 " or " NS/FS Clip Conn2 " locks. |
|
|||
" Gusset 2 Point "
( gusset plate dimensions and location ) |
" Brace Connection To Gusset Wide Flange Flange Plate "
|
||
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset 2 Point
( web-horizontal wide flange vertical braces, flange gussets, to a column )
Shared gusset plate dimensions and location
Plate thickness ( not depicted ):
Left Brace [ member number ]
Refx ( refx right ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
user defined | vertical brace review | top
Brace Connection To Gusset Wide Flange Flange Plate
(web-horizontal wide flange vertical braces, 2- or 3-point, flange gussets, to a column)
Hole pattern for field bolting the braces to the flange gussets
Bolt diameter ( not depicted ):
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( rsp ):
Edge distance along brace ( ed ):
Other edge distance along brace ( other ed ):
user defined | vertical brace review | top
Weld Conn2
(web-horizontal wide flange vertical braces, 2- or 3-point, flange gussets, to a column)
Shop weld, shared gusset plate to the supporting column
Weld size ( weld ):
" Weld Conn2 " locks apply when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window. " NS/FS Clip Conn2 " locks apply when ' Clip angle ' is selected for " Gusset to supporting member ." A special case : If the supporting column has a narrow flange and ' Welded ' is selected for " Gusset to supporting member ," the flange gussets may shop weld to the supporting column's flange with clip angles. |