" Brace Connection To Gusset Hss Bolted " connection design locks

A welded tee end fitting shop welds to an HSS, pipe or tube vertical brace when ' Bolted ' is selected as the brace's " Pipe/tube end-fitting ." Design of the welded tee and field bolting of the fitting to a 2- or 3-point shared gusset plate on a column is done per " Brace Connection To Gusset Hss Bolted " locks. Each welded tee consists of a stem plate and a cap plate .

(HSS vertical braces, welded tee field bolted to shared gusset, to a column) (vertical brace " Section size " = HSS, pipe or tube) (" Input connection type " = ' Vbrc plate ' or ' User defined ') (" Pipe/tube end-fitting " = ' Bolted ')
" Brace Connection To Gusset Hss Bolted " (welded tee on an HSS, pipe or tube brace)	" Brace Conn To Gusset Hss Bolted " (hole pattern for field bolts)
Related locks : Brace Connection To Gusset Hss Paddle Brace Connection To Gusset Hss Welded Gusset 2 Point Weld Conn2 NS/FS Clip Conn2

user defined | vertical brace review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Brace Connection To Gusset Hss Bolted
( HSS, bolted, 2- or 3-pt, to a column )

Stem plate

Thickness ( stem thickness ):

Width:

Length ( stem length ):

Refx:

Refy:

Stem plate to cap plate connection (shop welded)

Weld size ( stem weld ):

Stem plate to gusset connection (field bolted)

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows:

Distance to 1st hole along brace ( to 1st hole ):

Hole spacing along brace ( rs ):

Edge distance along brace ( ed ):

Other edge distance along brace ( oed ):

Columns:

Distance to 1st hole perpendicular to brace ( perp ):

Hole spacing perpendicular to brace ( cs ):

Horizontal edge distance ( hed ):

Cap plate

Thickness ( cap thickness ):

Width ( cap width ):

Length ( cap length ):

Refy ( not depicted ):

Refz ( not depicted ):

Cap plate to brace connection (shop welded)

Weld size ( cap weld ):

user defined | vertical brace review | top