" Brace Connection To Gusset Hss Paddle " connection design locks

A paddle plate end fitting on an HSS, pipe or tube vertical brace to a shared gusset on a column is designed per " Brace Connection To Gusset Hss Paddle " locks when ' Paddle plate ' is the selected " Pipe/tube end-fitting ."

(HSS vertical braces, paddle plate field bolted to shared gusset, to a column) (vertical brace " Section size " = HSS, pipe or tube) (" Input connection type " = ' Vbrc plate ' or ' User defined ') (" Pipe/tube end-fitting " = ' Paddle plate ') (" Notch top/bottom " controls the notch in the brace.)
" Brace Connection To Gusset Hss Paddle " (paddle plate on an HSS, pipe or tube brace)	" Brace Connection To Gusset Hss Paddle " (hole pattern for field bolts)
Related locks : Brace Connection To Gusset Hss Bolted Brace Connection To Gusset Hss Welded Gusset 2 Point Brace Reinforcement ( ) (HSS/TS) Weld Conn2 NS/FS Clip Conn2

user defined | verticall brace review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Brace Connection To Gusset Hss Paddle
(2- or 3-point, to a column)

Paddle Plate

Width:

Length:

Thickness ( not depicted ):

Refx:

Refy ( rfy ):

Paddle Plate To Gusset Connection

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows:

Distance to 1st hole along brace ( to 1st hole ):

Hole spacing along brace ( rs ):

Edge distance along brace ( ed ):

Other edge distance along brace ( oed ):

Columns:

Distance to 1st hole perpendicular to brace ( perp ):

Hole spacing perpendicular to brace ( cs ):

Horizontal edge distance ( hed ):

user defined | verticall brace review | top