" Seated Plate " connection design locks

A plate seat can be applied to a beam that is horizontal or sloping. An optional " Web Stability Angle " or " Top Flange Stability Angle " can be included along with the " Seated Plate " as part of the connection design.

(W or C or HSS/TS beam, plate seat, to a column web or flange) (" Input connection type " = ' Seated ' or ' Auto standard ' or ' User defined ') (" Seat material " = ' Plate ')
" Seated Plate "	Related locks : Web Stability Angle Top Flange Stability Angle Seated Tee Seated Angle

user defined | beam review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Seated Plate

Seat plate

Length ( seat length ):

Width ( seat width ):

Plate thickness ( thickness ):

Corner clip ( clip ):

Bolts in seat plate

Diameter ( not depicted ):

Hole type ( not depicted ):

Rows:

Horizontal to holes ( to holes ):

Gage:

Stiffener plate

Depth ( stiffener depth ):

Width ( stiff width ):

Plate thickness ( stiff thickness ):

Taper width ( tpr width ):

Clip ( not depicted ):

Welds

Seat ( seat weld ):

Stiffener ( stiff weld ):

user defined | beam review | top