The Preferred Angle Sizes setup window ( Fabricator Settings ) (read-only)

• This read-only window lists angle section sizes that are available in your current Fabricator .
• Angle section sizes must be entered to this list in order for beam and joist angle seats (stiffened or unstiffened), bolted flange angle moment connections and offset beam-to-beam framing to be designed when this same Fabricator Options file is used in a full-featured SDS2 program .
• If appropriate sizes are not listed, connection design will default to plate material.
• To find an appropriate angle for safety erection seats for safety erection seats , connection design searches this list first, then (if it can't find one), it will search the local shape file .
• See to open this window .

Also see :

• Angle (type of material listed on this window)
• Beam angle seat (designed with angles on this list)
• Top flange moment angles (designed with angles on this list)
• Joist top chord L seat (designed with angles on this list)
• Connection material for angles (steel grade for angles on list)

contents | home > project settings > fabricator > std fab conns > preferred sizes >

---

To open Preferred Angle Sizes :

Method 1 : Home > Project Settings > Fabricator > Standard Fabricator Connections > Preferred Connection Material Sizes > Preferred Angle Sizes .

contents | home > project settings > fabricator > std fab conns > preferred sizes > | top