" Gusset Beam Column " & " Brace Connection To Gusset Wide Flange Claw " & " Weld Conn2 "
A claw angle gusset connection for a web-horizontal wide flange vertical brace to a beam & column is designed per " Brace Connection To Gusset Wide Flange Claw " locks when ' Web claw angles ' is the " Connection arrangement ." The gusset plate (" Gusset Beam Column ") shop attaches to the beam per " Weld Conn2 " or, when applicable, " NS/FS Clip Conn2 " locks. |
|
|||||
" Gusset Beam Column "
(gusset plate location and dimensions) |
" Gusset Beam Column "
(cuts to the gusset plate) |
||||
" Brace Connection To Gusset Wide Flange Claw "
(angle to gusset connection) |
" Brace Connection To Gusset Wide Flange Claw "
(angle to brace connection) |
||||
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset Beam Column
( web-horizontal wide flange vertical brace to a beam & column )
Gusset plate dimensions and location
Plate thickness ( not depicted ):
Connection cut width ( cut width ):
Connection cut length ( cut len ):
Clip column side cut width ( column side cut width ):
Clip column side cut length ( column side cut length ):
user defined | vertical brace review | top
Brace connection To Gusset Wide Flange Claw
( web-horizontal wide flange, claw angles, to a beam )
Claw angle dimensions and location
Section size ( not depicted ):
Gage leg ( not depicted ):
Angle to gusset connection (field bolted)
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( rs ):
Angle to brace connection (shop bolted)
Distance to 1st hole along brace ( to 1st hole ):
Hole spacing along brace ( s ):
Edge distance along brace ( not depicted ):
user defined | vertical brace review | top
Weld Conn2
( web-horizontal wide flange vertical brace to a beam & column )
Shop weld, gusset plate to the supporting beam
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."