" NS Clip " & " FS Clip " connection design locks
" NS Clip " and " FS Clip " locks "vary according to Connection specifications " that control whether the clip angle(s) bolt or weld to the supported or supporting member. If the clip angle is ' Welded ' to the supported or supporting, a " Weld size " (supported) or " Weld size " (supporting) lock is available. Bolt locks for the leg to supported appear if the clip angle bolts to the supported beam. Bolt locks for the leg to supporting appear if the clip angle bolts to the supporting member (beam or column). |
|
|||||
" NS Clip " / " FS Clip "
( bolted to supported / bolted to supporting ) |
" NS Clip " / " FS Clip "
( welded to supported / bolted to supporting ) |
||||
" NS Clip " / " FS Clip "
( bolted to supported / welded to supporting ) |
|
||||
|
user defined | beam review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
NS Clip / FS Clip
Clip angle
" Attachment to supported " = ' Welded '
Weld size ( not depicted ):
" Attachment to supported " = ' Bolted '
Bolt diameter ( not depicted ):
Vertical to 1st hole ( vert to 1st ):
Vertical hole spacing ( vspc s'ed ):
Top vertical edge distance ( tved ):
Bottom vertical edge distance ( bved ):
" Attachment to supporting " = ' Welded '
Weld size ( weld ):
" Attachment to supporting " = ' Bolted '
Bolt diameter ( not depicted ):
Vertical 1st hole ( vert to 1st ):
Vertical hole spacing ( vspc s'ng ):
Top vertical edge distance ( tved ):
Bottom vertical edge distance ( bved ):