" Gusset Beam Column " & " Weld Conn2 " connection design locks
The gusset plate for a stem-vertical W Tee vertical brace to a beam & column (" Gusset Beam Column ") shop welds to the beam per " Weld Conn2 " locks, or can shop bolt to the beam with per " NS/FS Clip Conn2 " locks if the beam has a clip angle. The gusset field bolts to the column with a clip angle (shown) or shear plate or end plate . |
|
|||
" Gusset Beam Column "
(gusset plate dimensions and location) |
" Gusset Beam Column " |
||
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ') |
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset Beam Column
( stem-vertical tee vertical brace to a beam & column )
Gusset plate dimensions and location
Plate thickness ( not depicted ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
Clip column side cut width ( column side cut width ):
Clip column side cut length ( column side cut length ):
user defined | vertical brace review | top
Weld Conn2
(stem-vertical tee vertical brace to a beam & column)
Shop weld, gusset plate to the supporting beam
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."