" Gusset One Member " & " Weld Conn2 " connection design locks
The gusset for a wide flange vertical brace to a beam is designed per choices made to " Gusset One Member " locks. When ' Standard ' is the " Connection arrangement ," the brace field bolts to the gusset plate with flange angles and web plates.The illustration below shows the near-side flange angles and NS web plate. The gusset plate can shop weld to the beam (" Weld Conn 2 "), or it can shop bolt to the beam with a clip angle (" NS/FS Clip Conn2 "). |
|
||||
" Gusset One Member "
|
" Gusset One Member "
|
|||
" Weld Conn2 "
|
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset One Member
( wide flange vertical brace, standard connection, to a beam )
Gusset plate dimensions and location :
Plate thickness ( not depicted ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
Acute side clip cut length ( not depicted ):
user defined | vertical brace review | top
Weld Conn2
( wide flange vertical brace, standard connection, to a beam )
Shop weld, gusset plate to the supporting beam
Weld size ( weld ):
" Weld Conn2 " locks are availble when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are avalable when ' Clip angle ' is selected for " Gusset to supporting member ."