" Gusset One Member " connection design locks

The gusset of an angle, double-angle, W tee or wide flange horizontal brace to a beam's top flange is designed per " Gusset One Member " locks. The gusset shop welds to the flange.

(L or 2L or WT or W horizontal brace to a beam's top flange) (horizontal brace " Section size " = L, WT or W) (for an angle (L) brace, " Double material " = checked ( ) or not ( )) (" Input connection type " = ' Hbrc plate ' or ' User defined ') (" Clip end operation " = ' Yes ' or possibly ' Automatic ')
" Gusset One Member " (gusset plate dimensions and location)	" Gusset One Member " (acute side and obtuse side cuts)
The gusset plate shop welds to the top flange of the beam. The locks that control that shop weld are in the leaf named " HB Conn 2 ."	Related locks : Gusset One Member Square Brace Connection To Gusset HB Conn 2

user defined | horizontal brace review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

    Gusset One Member Square
(L, WT, 2L or W horizontal brace to a beam's top flange)

Plate thickness ( not depicted ):

Width ( plate width ):

Length ( plate length ):

Refx:

Refy:

Connection cut width ( cut width ):

Connection cut length ( cut lngth ):

Acute side clip cut width ( acute side cut width ):

Acute side clip cut length ( acute side cut length ):

Obtuse side clip cut width ( obtuse cut width ):

Obtuse side clip cut length ( obtuse cut length ):

Flat width ( flat ):

End distance ( end dist ):

Length acute side ( acute side ):

user defined | horizontal brace review | top