" Gusset 2 Point " & " Weld Conn2 " connection design locks
A shared gusset plate shop attached to a beam for a wide flange vertical brace with flange paddle plates is designed per " Gusset 2 Point " locks. ' Paddle plates ' is the " Connection arrangement ." The shared gusset may be for 2-point bracing (shown) or 3-point bracing (not shown). The gusset plate can shop weld to the column (" Weld Conn2 ") or, if it is a 2-point gusset, shop bolt with a clip angle (" NS/FS Clip Conn2 "). |
|
||||||
" Gusset 2 Point "
( gusset plate dimensions and location ) |
" Weld Conn2 "
|
|||||
|
user defined | vertical brace review | top
Connection design locks :
Locks not on the drawing are marked ( not depicted ). |
Gusset 2 Point
(web-vertical wide flange vertical braces, 2- or 3-point, flange paddle plates, to a beam)
Shared gusset plate dimensions and location
Plate thickness ( not depicted ):
Left Brace [ member number ]
Refx ( refx right ):
Connection cut width ( cut width ):
Connection cut length ( cut length ):
user defined | vertical brace review | top
Weld Conn2
( web-vertical wide flange vertical braces, 2-or 3-point, flange paddle plates, to a beam )
Shop weld, shared gusset plate to the supporting beam
Weld size ( weld ):
" Weld Conn2 " locks are available when ' Welded ' is selected for " Gusset to supporting member " under " Connection specifications " on the Vertical Brace Review window.
" NS/FS Clip Conn2 " locks are available when ' Clip angle ' is selected for " Gusset to supporting member ."