" Brace Connection To Gusset Hss Welded " connection design locks

In a brace-to-beam-&-column framing situation, an HSS, pipe or tube vertical brace field welds to a gusset per choices made to " Brace Connection To Gusset Hss Welded " locks. The gusset shop attaches to the beam.

(HSS vertical brace to a beam & column) (vertical brace " Section size " = HSS, pipe or tube) (" Input connection type " = ' Vbrc plate ' or ' User defined ') (" Pipe/tube end-fitting " = ' Welded ') ( " Erection bolts " = 0, 1 or 2)

" Brace Connection To Gusset Hss Welded " (" Erection bolts " = ' 2 ' in this example)

The leaf named " Brace Connection to Gusset HSS Welded " provides hole settings for insertion of erection bolts when -- in " Connection specifications " -- a vertical brace's " Pipe/tube end fitting " is set to ' Welded '. Related locks : Gusset Beam Column Brace Connection To Gusset Hss Bolted Brace Connection To Gusset Hss Paddle Gusset Hss Paddle With Web Plates Brace Reinforcement ( ) (HSS/TS) NS/FS Clip Conn1 Shear Tab End Plate Weld Conn2 NS/FS Clip Conn2

user defined | vertical brace | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Brace Connection To Gusset Hss Welded
( HSS vertical brace, welded, to beam & column )

Brace Connection To Gusset Hss Welded

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Distance to 1st hole along brace ( to 1st hole ):

Hole spacing along brace ( spacing ):

Edge distance along brace ( edge dist ):

Other edge distance along brace ( other edge dist ):

Field Weld Connection

Field weld size ( weld ):

Field weld length ( weld ):

user defined | vertical brace | top