Layer Erase All ( Drawing Editor )

Tool summary :

  • Deletes visible layers in your current drawing. All objects on those layers are deleted along with the layers.
  • If your current drawing is a crane placement drawing , Layer Erase All deletes all visible layers.
  • If your current drawing is a non crane placement drawing, Layer Erase All deletes all visible comment layers .
  • Visible layers are layers that are set to " Show " on the Edit Layers window.
  • If you Layer Erase All and all layers are visible, a blank layer is automatically created so that you can add new objects to it.
  • See the step-by-step instructions .

Also see :

  • Objects (deleted when layers are erased)
  • Comment layer ( Erase All only erases visible layers of this type on non crane placement drawings)
  • Crane placement drawings ( Erase All erases all visible layers of this type of drawing)
  • Show ( Layer Erase All acts on layers marked " Show ")
  • Layer Show All (so Layer Erase All acts on all layers)
  • Layer Erase (to erase the selected layer instead of all layers)
  • Clip (to erase selected objects on shown layers)
  • Undo (undoes drawing layer changes)

page 1 | contents | objects > layers > | objects -- layers

   Step-by-step instructions :

1 . Invoke Layer Erase All using any one (1) of the following methods:

Method 1 : Click the Layer Erase All icon. The icon can be taken from the group named ' Objects -- Layers ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Objects > Layers > Erase All .

Method 3, 4 or 5 : Layer Erase All can also be invoked using a keyboard shortcut , the context menu , or a mode . For the ' Lightning ' layout style, configuration of the interface is done using Customize Interface .

2 . An ok-cancel confirmation dialog opens. On it is the message, " Erasing layers will erase objects those layers. Are you sure you want to erase so much ?"

Alternative 1 : Press the " OK " button to erase the layers and the objects on them.

Alternative 2 : Press the " Cancel " button to end the Layer Erase All operation and keep everything as it was before step 1.

3 . The program erases layers that are marked " Show " (that are visible).

Possibility 1 : If your current drawing is not a crane placement drawing, the program deletes all visible comment layers.

Possibility 2 : If your current drawing is a crane placement drawing, the program deletes all visible layers.

Note: At this point you can still undo your changes by using Revert or Undo . If you Save to make your changes permanent, you will no longer be able to Revert , but you can still Undo .

page 1 | contents | objects > layers > | objects -- layers | top