Turnbuckle material
|
d = rod diameter
n = hole length a = inside length e = inside width g = width |
Other shape file specifications : " Weight " is the actual weight of the clevis that will be entered as the " Unit Weight " in the bill of material. " Capacity " is the nominal strength of the turnbuckle.
Additional settings that are not in the local shape file are defined on the Turnbuckle Material window. In an SDS2 review station , these additional settings, as well as the shape file specifications, are read-only.
Example from the 3D model :
Submaterial piece marking : The default material mark prefix for turnbuckle material, is tbk .