" NS Clip " & " FS Clip " connection design locks

" NS Clip " and " FS Clip " locks "vary according to Connection specifications " that control whether the clip angle(s) bolt or weld to the supported or supporting member. If the clip angle is ' Welded ' to the supported or supporting, a " Weld size " (supported) or " Weld size " (supporting) lock is available. Bolt locks for the leg to supported appear if the clip angle bolts to the supported beam. Bolt locks for the leg to supporting appear if the clip angle bolts to the supporting member (beam or column).

(beam, clip angle connection, to a beam or column) (beam " Section size " = W, S, C, welded plate wide flange, HSS/TS) (" Input connection type " = ' Clip angle' or ' Auto standard ' or ' User defined ') (" Moment type " = ' Non-moment ' or ' Bolted ' or ' Welded ')
" NS Clip " / " FS Clip " ( bolted to supported / bolted to supporting )	" NS Clip " / " FS Clip " ( welded to supported / bolted to supporting )
" NS Clip " / " FS Clip " ( bolted to supported / welded to supporting )	Availability : If, in " Connection specifications " on the Beam Review window, the clip angle is specified to be bolted to supported / welded to supporting , you will not get connection design locks for bolting the leg of the clip angle to the supported beam. To get such connection design locks, the clip angle needs to be ' Bolted ' to either or both the supported or supporting member. The supported member is the beam on which the clip angle is applied. The supporting member can be a beam or a column.
Related locks : Beam Web Doublers Web Extension Plate Welded Tee NS/FS Clip Conn1 (vertical brace) Top/Btm Moment Plate Top/Btm Moment Angle Column Web Doublers Column Flange Stiffeners

user defined | beam review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  NS Clip /   FS Clip

Clip angle

Section size ( not depicted ):

Long leg to ( not depicted ):

Top of angle ( top ):

Length of angle ( length ):

Relative rotation ( not depicted ):

Connection to supported

" Attachment to supported " = ' Welded '

Weld size ( not depicted ):

" Attachment to supported " = ' Bolted '

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows ( rows s'ed ):

Vertical to 1st hole ( vert to 1st ):

Vertical hole spacing ( vspc s'ed ):

Top vertical edge distance ( tved ):

Bottom vertical edge distance ( bved ):

Columns ( cols s'ed ):

Horizontal to 1st hole web ( 1st ):

Horizontal hole spacing ( hspc ):

Connection to supporting

" Attachment to supporting " = ' Welded '

Weld size ( weld ):

" Attachment to supporting " = ' Bolted '

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows ( rows s'ng ):

Vertical 1st hole ( vert to 1st ):

Vertical hole spacing ( vspc s'ng ):

Top vertical edge distance ( tved ):

Bottom vertical edge distance ( bved ):

Columns ( cols s'ng ):

Horizontal 1st hole ( horz to 1st ):

Horizontal hole spacing ( hspc s'ng ):

user defined | beam review | top