" Top Moment Plate " & " Bottom Moment Plate " connection design locks

Bolted moment flange plates can be designed for a beam to a column web (shown) or flange (not shown) per " Top Moment Plate " and " Bottom Moment Plate " locks. " Columns of bolts " run parallel with the workline of the beam.

(W beam to W column web or flange, bolted moment flange plate connection) (" Input connection type " = ' Shear ' or ' Clip angle ' or ' Bent plate ' or ' User defined ') (" Moment type " = ' Bolted ')

" Top Moment Plate " / " Bottom Moment Plate "

Availabliity : The settings for " Transverse weld " and " Parallel weld " and " Corner clip/cope " are available as " Top/Bottom Moment Plate " locks for a wide flange beam framing to a wide flange column's web. Those settings are not available when a wide flange beam frames to a wide flange column's flange. Related locks : Column Flange Stiffeners Column Web Doublers Shear Tab Bent Plate or NS/FS Clip Other locks (welded) Top/Bottom Moment Plate Moment End Plate Top/Bottom Moment Angle (splice) Moment Flange Plate (moment):

user defined | beam review | top

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Top Moment Plate /   Bottom Moment Plate

Bolted moment flange plate

Plate length ( length ):

Plate width ( width ):

Plate thickness ( not depicted ):

Corner clip/cope ( clip/cope ):

Taper length:

Taper width:

Flange bolts

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows:

Horizontal to 1st hole ( to 1st ):

Horizontal hole spacing ( rowsp ):

Columns:

Vertical to 1st hole ( gage/2 ):

Vertical hole spacing ( colsp ):

Welds

(beam to column flange)

Weld size ( not depicted ):

(beam to column web)

Transverse weld ( transweld ):

Parallel weld ( parallweld ):

user defined | beam review | top